Loading... Please wait...

GTXR (GTR) Axle Blocks

Hover over image to zoom

  • Image 1
Plastic Spider
$140.00

 Product Description

These are only being made to order.
Email me at robert@plasticspider.com if you would like to get a set.

We will no longer be anodizing the Axle Blocks. 

They will come sandblasted with a matte silver finish as shown in the picture above.

Thanks, Robert.......

These Axle Blocks for the Onewheel GT that is using the Milled Hub, Golf Disc or Spacer to install an XR Hub on a GT Stator.

You should be aware of what these items do and which version you need before purchasing.  If you are not sure send an email to robert@plasticspider.com.

You have a choice of 1.6mm Offset and 3.0mm Offset Axle Blocks.

  • 1.6mm Offset - This is for use with a Milled XR Hub.
  • 3.0mm Offset - This is for use with the Golf Disc or 1.6mm Adapter Plate (Spacer) with an XR Hub.

Included are 2 Axle Blocks (Left and Right Side)

Slots are added to the top of each Axle Block for improved cooling.

These are machined from solid 6061 T6511 Aluminum and are stronger than the original cast parts.

Note that the Left Axle Bolts will extend into the Axle 1.6mm or 3mm further and the Right Axle Bolts will extend in the Axle 1.6mm or 3mm less depending on which option you purchase.

Be aware that doing this conversion on your board may Void your Warranty and you accept that any modifications you do to your board you do at your own risk.  

Also Note that you cannot use the handle with these Axle Blocks.

If you would like to purchase a 1.6mm Aluminum Adapter Plate you can get it here.

 

 Find Similar Products by Category

 Product Reviews

  1. 3mm Axle blocks

    Posted by DJ owen on Oct 21st 2022

    These axle blocks are what you need if you have swapped xr hub to gt not only is my wheel centered with the axle blocks but the fins on the blocks are helping keep my gt motor cool from overheating I can’t say enough good things about the axle blocks but thanks for making them. It’s company’s like this that will help make the Onewheel GT better than stock.


  2. It’s a must if you have a milled hub

    Posted by Alec on Aug 28th 2022

    I love these axle blocks. I did a GTR conversion with a milled XR hub, so I wanted these to center the hub.

    They are well machined, love the raw aluminum look, and I swear they helped with heat dissipation due to the lack of paint and the fins at the top.

    Also I ended up needing longer screws for the wire keeps and these guys sent me screws before I even asked for it - they are on the ball.

    Great company, great product, THANK YOU!


You Recently Viewed...

 

newsletter

Follow us on

Copyright 2024 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the GTXR (GTR) Axle Blocks to your wish list.